Are you looking for a Solution to Traeger Timberline 1300 Problems? We know this is one of the top-rated smokers from Traeger. But despite being top quality, it has flaws.
Well, Timberline 1300 has one of the best premium pellet smokers that you can use in the coldest weather, giving excellent results!
Traeger is one of the top brands in grill manufacturing, which has had some problems with its Timberline 1300 models. As always, we know that innovation always comes with initial issues. That doesn’t mean the features are bad.
Timberline 1300 pellet smoker comes with tons of awesome advanced features, the most attractive being the use of the remote control, although you have to pay a heavy price for it.
One day you’re trying to smoke but having problems with the Traeger 1300 temperature. A big disappointment after huge investment. We know something is going wrong with your Traeger smoker so here you are.
Traeger Timberline 1300 issues, overheating and low heating is a common problems. Keep reading to learn how to fix these problems. After completing this guide you can heat things up again!
Traeger Timberline 1300 Problems
I hope you understand there is no one grill that is perfect. Everyone has their own issues, just like the Traeger Timberline 1300 comes with its own problems.
Sometimes the problem is limited, but when the grill is not burning or the temperature is dropping rapidly, the problem is bigger.
Here are some of the most frequently encountered issues with this Traeger Timberline 1300.
One of the most common problems of the Traeger Timberline 1300 is an abnormal temperature change. Sometimes it heats up quickly and sometimes it takes years to warm up. In other cases, it takes a few moments.
Normally, any grill smoker should take about 5 to 10 minutes to heat up.
The Fire Disappeared
Does your Traeger Timberline 1300 pellet smoker fail to light and the fire is quickly extinguished?
We have found that this problem only occurs when your pellet grill is having a faulty or broken igniter/hot rod being used. Often the hot road/igniter gets damaged or breaks after a few years.
A bad igniter/hot rod fails to ignite the wood pellets, but the auger continues to throw the pellets into the burning vessel, thus jamming the auger.
Whenever such a settlement occurs, you should immediately check the fire pot, it blocks the airflow which is used to keep the fire alive.
Auger System or Pellet Blockage
A situation like a pellet blockage can be made worse because the Timberline 1300 has an automatic auger system that is attached to the hopper and continuously tries to push pellets into the firepot.
Research suggests that this type of problem arises when you use poor-quality wood pellets. If you have opted for wet wood pellets, they will break when the unit puts pressure on them and won’t even burn because of the wetness.
Traeger Pellet smoker auger jam is the most common cause that was caused by not cleaning the hopper and using pellets in the hopper for weeks after your last smoking session.
We decided what would happen if we left the wood pellet in the hopper for a week. A week later when the hopper was opened the wood pellets on top were normal, but as soon as I pressed it with my fingers, it felt wet.
In this case, the auger will push the pellets into the firepot but they will break and it will be almost difficult to put out the fire inside the chamber.
No Flame at all
Another common problem is that the Traeger 1300 doesn’t have flames. There are likely to be many reasons for this. The pellets would not have made it to the firepot.
There may be a lot of ash in the grill that you haven’t cleaned or the hot rod may be in bad condition.
Most pellet smokers require a sufficient electric power supply to operate, in the same way as, Traeger Timberline 1300 pellet grill. But power is undoubtedly a serious issue.
The Traeger 1300 pellet smoker’s induction fan is one of the few critical components that require proper power to operate otherwise it will not work.
The operation of the induction fan is failure sensitive. Because lack of power is usually the root of the problem.
How to Solve Traeger Timberline 1300 Issues
How do I fix these problems on my Traeger Timberline 1300 pellet smoker?
A common cause of any problem is insufficient power supply, which is no big deal. For this smoker to work properly you will need to connect it to a proper power outlet.
Temperature Fluctuates Solution
Fluctuating heat is a common problem for many reasons that cannot be solved by cleaning the pellet hopper alone. Many factors are responsible for the fluctuation in temperature. If you have a similar problem with your Timberline 1300, you should follow the given guidelines.
- Be sure to clean your pellet hopper properly.
- Remove all dust, ahs, and build-up ash from the grill fire pot.
- Must use the right kind of wood pellets.
- Check the induction fan.
- Check the hot rod igniter and temperature sensor.
- Use always fresh hardwood pellets.
How to Solve Auger System or Pellet Blockage
If the Timberline 1300 Grill’s auger system is jammed, you’ll need to open it up and check it out with a simple repair and maintenance process. Let’s know what to do.
- Remove all pellets and clean the hopper thoroughly.
- Make sure the inside of the hopper is completely dry.
- Regular cleaning of pellets from the hopper is essential to avoid such problems further.
A problem like a pellet blockage is enough to solve on its own and needs to be cleaned, once the problem of an Auger jam is solved to avoid such issues it is necessary to use high-quality pellets.
Solution For Light Failure
There are two main reasons why your beloved Traeger Timberline grill may not light. For wood pellets to fire properly, the pellets should be completely dry as well as the hot road present in the firepot should also work well otherwise the fire will not start.
After the pellet gets inflamed, it needs oxygen which is delivered to it by an induction fan. If there is a problem with it, chances are the fire will eventually go out.
- Check your hot rod ignitor is working properly, if not immediately changed.
- If the induction fan is not working it needs to be replaced after cleaning all the dust without any delay.
- All type of pellet smoker has replaceable induction fan.
- You can easily install this replacement fan by yourself.
Replace All Damaged Critical Parts
It is impossible to cook any type of food without the right temperature information, no matter how premium your pellet smoker is.
We know that there is a problem with some critical components of the Traeger Timberline 1300 pellet grill that has caused you to fluctuate in temperature, so replace them immediately.
What are the most critical components that affect temperature – induction fan, hot rod ignitor, and temperature sensor? It’s easily fixed by yourself.
FAQ – Traeger Timberline 1300 Problems – plse
How long does it take a Traeger Timberline 1300 to ignite?
With the open lid, set your Traeger Timberline 1300 grill to the smoke setting. Can you hear the fan running? Wait about 5 minutes for it to fire up and set.
How do you reset a Timberline 1300 Traeger?
If you want to reset Traeger Timberline 1300 grill on the factory setting follow the step!
1. Go to the factory to reset the grill,
2. Find out the setting,
3. Click on About Grill and hold onto the Ignite Button,
4. After a few seconds The Traeger logo will pop up,
5. Click on the reset option and you’re good to go.
Why are my Traeger pellets catching fire?
A large build-up of ash from pellets is caused by the fire in the pellets. If there is no fire in the furnace, the pellets continue to feed and eventually overflow.
Pellet fire occurs when all of these pellets are ignited in and around the firepot.
Why does my Traeger grill keep going out?
The main reason for such a situation is low-quality pellets, which produce a lot of Wood pellet ash. Excess pellet ash can cause a fire in the middle of the cooking process.
The RTD probe can also give incorrect information to the controller, which can lead to a smaller number of pellets being put into the firepot.
How do you ignite a Traeger 1300?
The Traeger Timberline 1300 Pellet Smoker can actually take a few minutes to get started.
Once you push the “Ignite” button, the actual ignition process begins, and then it takes a few minutes for the grill to burn the pellets.
We recommend you keep the lid closed during this whole process for better heat regulation.
Why does my Traeger grill keep shutting off?
The most common reason for a Traeger Timberline to shut down is that if your grill stays at 550 degrees Fahrenheit for more than 45 seconds, the grill system will shut down the auger and fan to begin the cool-down process.
Final Verdict – Traeger Timberline 1300 Problems
We have no hesitation in saying that no matter how big a grill is, everyone has its flaws and the Traeger Timberline 1300 Pellet Smoker has its flaws too. However, all units have their limitations.
We believe the Traeger 1300 is the ultimate pellet smoker that works well in even the harshest cold weather. There is no denying that this is an amazing pellet smoker that is appealing to the pitmaster, even if it weighs a lot in your pocket.
If you have read carefully, you would have found that there seems to be one solution to all the problems, i.e. cleaning the pellet hopper, firepot, and auger system.
We’ve detailed common problems and treatments for Timberline 1300 pellet smokers. We hope this guide will help you find the right solution to your specific grill issues.
Top 12 Best Portable Gas Grills Ultimate Guide
Best Gas Grills Under $1000 Complete Buying Guide
Top 7 Best Gas Grills Under 500 Ultimate Buying Guide