WD40 To Clean Stainless Steel Grill (How To)

One of the biggest hassles in owning a stainless steel grill is its maintenance. Based on my own experience, I’m going to tell you the best way to keep a BBQ grill looking like new for which we use the WD40 to clean stainless steel grill.

I assure you will not find such a method somewhere which I call the best way to clean stainless steel bbq grill.

How To Use WD40 To Clean Stainless Steel Grill

Often we don’t always use our grill unit, it is used at intervals of a few weeks or months, in which case the stainless steel grill can rust.

So, here are 5 simple steps on how to clean stainless steel grill that you can follow to prepare your barbecue for the colder months.

1. Bring All Necessary Supplies Together

Before you start to clean a BBQ, it’s a good idea to assemble all the supplies that you’ll be needing:

  1. Cleaning gloves
  2. Wire grill brush
  3. Warm soapy water
  4. Sponge
  5. Stainless steel cleaner
  6. lint-free cloth,
  7. Silicon scraper or steel scraper
  8. WD-40 Multi-Use Product

Once you have put together all the supplies, it’s time to get your hands dirty.

2. Clean the Exterior Of the Stainless Steel Grill

How to clean the exterior stainless steel grill? Follow the instructions;

  • Using a generous amount of warm soapy water.
  • Lift the exterior of your grill and wash off the foam and wipe the surface dry.
  • For stainless steel components, use spray steel cleaner,
  • Then wipe down with a lint-free cloth.

3. Go Under The Lid

Now start cleaning your stainless steel grill. When you remove the lid it is quite likely that you will see some peel as soon as you remove the lid.

But you don’t need to worry too much about this as it is not painting, it could just be accumulated grease, smoke, or debris. It may not bother you and can be easily removed.

Use these tips

  • Use a wire grill brush to remove carbon deposits on the inside of the lid.
  • Then, use the sponge you used to clean the exterior of the grill.
  • Wash the inside of the lid with soapy water.
  • Wash off with soap.

4. Cleaning Stainless Steel Grill Rack

This is the most important issue when it comes to cleaning grill grates. Here we are going to use WD40 to clean the grill.

  • Remove the grates from the stainless steel grill.
  • Apply WD-40 multi-use product and let the fast-acting formula sit on the rack for 5 to 10 minutes.
  • Wipe with a clean cloth, then wash off all excess WD-40 residue with warm soapy water.
  • Leave the stainless steel grill grates to dry completely and wipe them with a clean cloth.

In fact, the more stubborn the dirt, the more likely it is to leave scratch marks on the grill. Because you are using a wire brush for which you are using more power.

However, you must be more careful here as the extra pressure will scratch, and loosen the layer so use the cleaning brush gently.

Go to Interior Grill Cleaning

By now you’ve cleaned up the grill’s exterior structures and good-sized parts, but it’s time to go where the most problems are.

  • Use a putty knife or silicone scraper to carefully remove grease residue or food accumulation around the burner tubes.
  • It is important to clean the drip tray and bottom tray, first removing any residue on them.
  • Then wash them with soap and warm water. Line the drip tray with aluminum foil to add an extra layer.
  • To clean a stainless steel basket, submerge it in a bucket of warm soapy water and scrub it with a scouring pad, and then wash it.
  • Dry all stainless steel parts, small or large, then spray WD-40 multi-use product over it, letting some dry.
  • Wash the basket, burner, and gas tube with hot water and wipe them off using a lint-free cloth.
  • In the last step put all the parts back on the grill.

Watch this video on how to make stainless steel look new again.

Does stainless steel not rust?

It is a very common belief that stainless steel does not rust. It rusts as easily as any other steel metal, but it takes a little longer.

The reason this happens is that it can easily deteriorate, pit, and discolor if not properly protected and maintained. WD-40 stainless steel rust best removal tool.

Important Tips

Did you know that a salty environment helps any high-quality material to get rust? If you are living close to the sea area, you need to work harder to keep the stainless steel grill safe.

You will need to polish and clean your stainless steel home appliances frequently. Use a stainless steel protector that works best. Take care not to let the water collect near it.

Important Precautions

Do not use WD-40 near food or in food preparation areas as it is a health hazard. This includes the interior of the grill, stainless steel sink, grill rack, inside cabinet, warming drawer, and oven.

WD-40 Never spray an open flame! This product is extremely flammable in its aerosol forms.

Although WD-40 contains nitric acid that is effective at removing rust, it is a highly corrosive chemical. Because of the potential for damage to your stainless steel, we do not recommend using nitric acid repeatedly.

FAQ

Will wd-40 damage stainless steel

Yes, if you use it regularly to clean your stainless steel grill, it will damage the grill’s shine and material.

Does WD-40 remove scratches from stainless steel?

Yes, it will help to remove scratches from stainless steel, also great at talking grease and water stains on stainless steel.

What should you not use WD-40 on?

Don’t use WD-40 to clean such grill grates, door hinges, squeaking, bike chains, Paintball guns, Smartphones, iPods, iPads, and more sensitive items

Final Verdict

We all love grilled meats, but to get the best flavor needs to be maintained from time to time. So that you can always get the best-grilled taste without any hassles.

We hope cleaning your Stainless Steel Grill with WD-40 will help keep your beloved BBQ unit mate looking new forever as it has been doing for us.

We highly recommend that you only use WD-40 on the exterior of the grill.

Your BBQ Grill is ready for some Happy Grilling Just take care of it.

Leave a Comment

%d bloggers like this: